The Decepticons
09/17/2010, 20:36
Evening. Just wanted to say thanks for the great set. Lot of good quality pieces and the sculpts are great. There is one slight problem though that i did notice.
First off, i know you changed the plastic bags that the cards for the figs come in when pulled from the booster. Thats ok, easy cost saving measure. Making the plastic thinner, and changing the size of the bag im sure saved a decient chunk of change on your overhead to crank out the entire run. There is one problem i have with them though. Love the old bags, and thats cool if you're going with the newer thinner ones. Dont have any probelm with that. But since the bags are now taped over with the cards vertically instead of horizontally, making the bags about a quarter of an inch longer would be great.
I opened a case and a half, and since the bags are about the same length of the cards(which are thinner cardboard, but thats cool too), about a third of what i opened had the tape that you use to seal the bag over so the cards dont come out actually stuck to one or two of the cards just along the edge of it.
I know that's what print and play is for, if the card isnt there, lost or ripped/creased out of the package. But the're are a lot of people who use the original cardboard. And while most of the time the tape on the card with a bit of care is removable without destroying it, i did end up ripping a card because of the tape. I think that the extra quarter inch would pretty much eliminate this completely.
Once again though... thanks for a great set.
First off, i know you changed the plastic bags that the cards for the figs come in when pulled from the booster. Thats ok, easy cost saving measure. Making the plastic thinner, and changing the size of the bag im sure saved a decient chunk of change on your overhead to crank out the entire run. There is one problem i have with them though. Love the old bags, and thats cool if you're going with the newer thinner ones. Dont have any probelm with that. But since the bags are now taped over with the cards vertically instead of horizontally, making the bags about a quarter of an inch longer would be great.
I opened a case and a half, and since the bags are about the same length of the cards(which are thinner cardboard, but thats cool too), about a third of what i opened had the tape that you use to seal the bag over so the cards dont come out actually stuck to one or two of the cards just along the edge of it.
I know that's what print and play is for, if the card isnt there, lost or ripped/creased out of the package. But the're are a lot of people who use the original cardboard. And while most of the time the tape on the card with a bit of care is removable without destroying it, i did end up ripping a card because of the tape. I think that the extra quarter inch would pretty much eliminate this completely.
Once again though... thanks for a great set.